Parts Identification - Panasonic ER214 Bedienungsanleitung

Do not use to trim the hair of a
pet.
• Failure to observe this may re-
sult in injuries to the skin.
3) Check that the blades are not
damaged or deformed before
use.
• Failure to observe this may re-
sult in injuries to the skin.
4) When using attachments, do so
in accordance with the instruc-
tions and set the height setting to
the maximum.
• Failure to observe this may re-
sult in the beard being trimmed
too much.
Important
1) When disconnecting the electric
cord from the wall socket, always
grip the electric plug and not the
electric cord.
• Failure to observe this may re-
sult in electric shocks or short
circuits.
2) Do not store or charge the trim-
mer in a place exposed to direct
sunlight or near a heater or other
source of heat.
• Failure to observe this may re-
sult in malfunctions or deforma-
tions.
3) Lubricate the trimmer before use.
• Failure to observe this may re-
sult in the blades becoming dull
or abnormal noises.
• Failure to observe this may re-
sult in the blades becoming hot
and the deterioration of cutting
performance.
4) Never allow charging to continue
for longer than 48 hours.
OS01L015_ER214-ER216_E
• Failure to observe this may re-
sult in shorting the life of the re-
chargeable battery.
5) The trimmer may become warm
during operation and/or charging.
This is normal.
6) Keep out of the reach of children.
7) Turn the switch off exchanging the
head.
8) Do not attempt to charge the trim-
mer at temperatures below 0°C
or above 40°C. Charging cannot
be done correctly under such
conditions.
This trimmer is indoor use only.

1 Parts identification

A Trimmer head
B Head exchange button (Shaver
head is packed with ER216
only.)
C Trimming height adjustment
switch
D Trimming height attachment
E Oil
F Cleaning brush
G Blade
*Can be removed.
H Body
I On/Off switch
J Charge status lamp
K Electric cord
L Shaver head (ER216 only)
M Protective cap (ER216 only)
7
7 1/17/02, 4:43 PM