Herunterladen Inhalt Inhalt Diese Seite drucken

General Power Tool Safety Warnings; Work Area Safety - Parkside PHKSA 20-Li A2 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für PHKSA 20-Li A2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 106
Charger: PLG 20 A1*
INPUT:
Rated voltage:
Rated power
consumption:
Fuse (internal):
OUTPUT:
Rated voltage:
Rated current:
Charging time:
Protection class:
*BATTERY AND CHARGER ARE NOT INCLUDE
Noise emission value:
Noise measurement value determined in
accordance with EN 62841. The A-rated noise
level of the power tool is typically as follows:
Sound pressure level: L
Uncertainty K:
Sound power level:
Uncertainty K:
Wear hearing protection!
Vibration emission value:
Total vibration values (vector total of three
directions) determined in accordance with EN
62841:
Sawing wood = 5,33 m/s
Uncertainty K = 1.5 m/s
NOTE
The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with
a standardised test procedure and can be
used for comparison of the power tool with
another tool.
The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
PHKSA 20-Li A2
230–240 V ~ , 50 Hz (AC)
65 W
T3.15A
3.15 A
21,5 V
(DC)
2.4 A
approx. 60 min
II / (double insulation)
= 74,3 dB(A)
PA
K
= 3 dB
PA
L
= 85,3 dB (A)
WA
K
= 3 dB
WA
2
2
WARNING!
Depending on the manner in which the power
tool is being used, and in particular the kind of
workpiece that is being worked, the vibration
and noise emission values can deviate from
the values given in these instructions during
actual use of the power tool.
Try to keep the load as low as possible.
Measures to reduce the vibration load are,
e.g. wearing gloves and limiting the working
time. Wherein all states of operation must be
included (e.g. times when the power tool is
switched off and times where the power tool is
switched on but running without load).
General power tool
safety warnings
WARNING!
Read all safety warnings, instructions,
illustrations and specifications provided
with this power tool. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
GB │ CY 
 3

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis