Mounting Position - Canon RS-CL07 Installationsanleitung

Mounting Position

The connection between projector screen size and projection distance is shown below.
Install the projector straight in front of the screen. Mounting the projector sideways distorts the projected
image.
● Before mounting the Ceiling-mount Hanger, be sure to check the strength of the ceiling. The
ceiling should be strong enough to support the projector and Ceiling-mount Hanger (and optional
extension pipe). If the ceiling is not strong enough, be sure to reinforce it (For weight of projector,
ceiling-mount hanger, and extension pipe, refer to page 1).
Caution
● Be sure to install the Ceiling-mount Hanger to the ceiling which is flat and level. Do not install it to
rough or un-level ceiling. Do not let children hang from it.
● To prevent falling caused by earthquake or vibration, take anti-fall measures using tension wires or
the like for installation.
RSCL07 : WUX10 MarkII
Height
Width
Distance from ceiling to lens center (l)
RS-CL07/RS-CL10
25 cm/0.8'
Screen Size and Projection Distance
Screen size (inch)
(Width x height cm)
1.2 m/3.9'
Projection distance (Zoom max.)
1.8 m/5.9'
Projection distance (Zoom min.)
● The distance can be adjusted within the range shown above by changing the screen size using the zoom function of the projector.
Ceiling-mount bracket
100 mm 100 mm
80 mm 80 mm

l
Projection Distance
When RS-CL08 is used When RS-CL09 is used
60 cm/2.0' to 80 cm/2.6' 80 cm/2.6' to 120 cm/3.9'
40 60 80
86×54 129×81 172×108
1.8 m/5.9' 2.4 m/7.9'
2.6 m/8.5' 3.5 m/11.5'
168 mm
178 mm
346 mm
Side view
178 mm 168 mm
Top view
100 150 180
215×135 323×202 388×342
3.0 m/9.8' 4.5 m/14.8' 5.4 m/17.7'
4.4 m/16.1' 6.7 m/22.0' 8.0 m/26.3'
62 mm
284 mm
Front view
16:10
Height
Screen size
Width
200 250
431×269 538×337 646×404
6.1 m/20.0' 7.6 m/24.9' 9.1 m/29.9'
8.9 m/29.2' -
300
-