Canon RS-CL07 Installationsanleitung Seite 14

Canon Ceiling-mount Hanger
RS-CL0/RS-CL0 Assembly/Installation Manual
Applicable projector models
(As of December 2009)
The Ceiling-mount Hanger is used to secure the projector to the ceiling.
● Ask an expert builder to install the Ceiling-mount Hanger.
● The Ceiling-mount Hanger RS-CL07/RS-CL10 can be used exclusively for Canon projectors
(models listed above). It cannot be used for any other equipment. Do not place/hang any other
objects on/from this Ceiling-mount Hanger. Do not let children hang from it.
Caution
● Assemble and install this Ceiling-mount Hanger correctly in accordance with this manual.
● Make sure to tighten screws securely. Do not remodel any part.
● For details on cautions on using the projector, refer to the User's Manual that came with the projector.
Parts Lineup
Supplied Parts
Ceiling-mount bracket and Joint fitting
Ceiling-mount bracket
* The Ceiling-mount bracket must
be separated from the Joint fitting,
before installation.
Ceiling-mount bracket
RS-CL07
Extension pipe RS-CL08/RS-CL09 (option)
● Use an optional extension pipe (RS-CL08/RS-CL09) according to the ceiling height. For details, contact our
local agent.
/
RS-CL08
Outer/inner pipes and outer/inner covers
M5 screw (12 mm/0.5") : 4 pcs.
M3 screw (10 mm/0.4") : 1 pc.
The length is adjustable between 35 cm/1.1'
and 55 cm/1.9' in steps of 5 cm/2".
Projector weight
RS-CL07：WUX10 MarkII/SX7 MarkII/SX60/X700
RS-CL10：SX80 MarkII/SX800
Weight: RS-CL07 (3.7 kg/8.2 lbs)/RS-CL10 (4.1 kg/9.1 lbs)
Joint fitting
RS-CL10
RS-CL09
Outer/inner pipes and outer/inner covers
M5 screw (12 mm/0.5") : 4 pcs.
M3 screw (10 mm/0.4") : 1 pc.
The length is adjustable between 55 cm/1.9'
and 95 cm/3.1' in steps of 5 cm/2".
WUX10 MarkII: 5.0 kg/11.02 lbs SX7 MarkII/X700: 4.8 kg/10.6 lbs
SX60: 4.6 kg/10.1 lbs SX80 MarkII: 5.2 kg/11.4 lbs SX800: 5.0 kg/11.02 lbs
RS-CL07
M5 screws (12 mm/0.5") : 4 pcs.
M4 screws (10 mm/0.4") : 6 pcs.
Anti-fall wires: 2 pcs.
Canon logo seal: 2 sht.
Template sheet for a ceiling-mount hole: 1 sht.
RS-CL10
M5 screws (12 mm/0.5") : 4 pcs.
M4 screws (10 mm/0.4") : 5 pcs.
Anti-fall wire (short) : 1 pc.
Anti-fall wire (long) : 1 pc.
Canon logo seal: 1sht.
Template sheet for ceiling mount hole: 1 sht.
Weight: RS-CL08 (2.2 kg/4.9 lbs)/RS-CL09 (3.4 kg/7.5 lbs)
前方
FRONT
取付け用ネジ穴位置 取付け用ネジ穴位置
SCREW HOLE POSITION SCREW HOLE POSITION
投写レンズ中心位置
PROJECTION LENS CENTER
天板取付用型紙
TEMPLATE FOR RS‑CL10
配線用穴最大領域
CABLE HOLE MAX AREA
取付け用ネジ穴位置
取付け用ネジ穴位置
SCREW HOLE POSITION SCREW HOLE POSITION