Pioneer SGY-PM930H Bedienungsanleitung Seite 6

EN
• Single power meter mode (Page 24)
SGX-CA600 is required to switch from pedaling monitor mode. Cannot be switched
with cyclocomputers from other manufacturers. To switch from the dual power meter
mode, use SGX-CA600 or press the push switch of the right sensor. When the mode
is switched, the LEDs on the sensors blink orange for 10 seconds.
Current mode
Pedaling monitor
Dual power meter
Manuals
The product's manuals consist of this User's Manual, Support Pages, and
Important Information for the User.
• User's Manual (this document)
Explains how to switch the modes of the product, and how to pair the product
with the Cyclocomputer and calibrate the sensors.
• Support pages (WEB site)
http://pioneer-cyclesports.com/us-en/support/products/
Explains details about handling methods. How to detach the product (for
dealers) is also described in the references.
• Important Information for the User
Important Information for the User provides detailed information related to
safety.
6
Method 1
(Right sensor push switch)
Cannot be switched
○
Method 2
lighting
(SGX-CA600)
method
○
The LEDs blink
orange for 10
○
seconds
LED