Pioneer SGY-PM930H Bedienungsanleitung Seite 17

4. Enter the device number.
The device numbers are printed on
the right junction box and on the side
of the left sensor. (Page 8)
5. Rotate the bicycle's crank
set more than three rotations
to start the left and right
transmitters.
• Pair with the Cyclocomputer within
5 minutes after the transmitters are
activated.
Switching to the pedaling monitor mode
6. Select [Pedaling Monitor].
The search for the sensor starts. A
[Please wait.] message appears.
• It may take more than 1 minute to to
pair with the sensor.
The mode switching completion
screen opens. Select OK if you want
to add in the sensor list.
EN
17