General Cleaning Instructions; Clean Foot Part; Storage; Waste Disposal/Environmental Protection - Parkside PTPS 1100 A1 Originalbetriebsanleitung

GB MT
Pull out the power plug before
every maintenance operation.
There is a risk of electrocution or of
injury from moving parts.
General cleaning
instructions
• In case of transport for utilization in
different locations, the pump must be
cleaned with clear water after every
use.
• In case of stationary installation, the
function of the loat switch (
to be checked regularly (at the latest
every three months).
• With a water jet, remove luff and
ibrous particles which are possibly
present in the pump casing.
• Regularly remove sludge from the pit
base and also clean the shaft walls.
• Clean precipitation from the loat
switch with clear water.
• In the case of a long period of non-
use, the pump must be thoroughly
cleaned after the last use and before
the new use, since dificulties in start-
up can arise due to precipitation and
residues.

Clean foot part

Always remove the mains plug
before working on the device.
Moving parts create the risk of
electrocution or injury.
Dirt on the bottom of the pump can be
washed down with clear water.
38
Any measures above and beyond these,
particularly opening the equipment, are
to be carried out by an electrician. In the
case of repairs, always contact our service
centre.

Storage

• Keep the equipment clean, dry and out
of the reach of children.
• Unscrew the bracket adapter (
storage.
• Wind up the power supply cable (4)
3) is and hang it between the handle (1) and
the loat switch height adjustment (2) on
the loat switch height adjustment bra-
cket (2). See illustration
Waste Disposal/Envi-
ronmental Protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have inished with them.
Do not dispose of electrical
appliances as unsorted municipal
waste, use separate collection
facilities.
Hand over the device at an utilization
location. The plastic and metal parts
employed can be separated out and thus
recycled use can be implemented. Ask our
Service-Center for details.
Defective units returned to us will be
disposed of for free.
9) for
.