Herunterladen Inhalt Inhalt Diese Seite drucken

Special Instructions For Safe Operating; Areas Of Application - Parkside PTPS 1100 A1 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für PTPS 1100 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Special instructions for
safe operating
• The equipment is not to be oper-
ated if there are people in the
water. There is a risk of electric
shock.
• Connect the equipment only to
a socket with a RCD (Residual
Current Device) with a rated
current of not more than 30 mA;
minimum fuse 6 amperes.
• If the mains cable of this device
is damaged, it must be replaced
by the manufacturer or their
customer service or by a simi-
larly qualiied person in order to
avoid hazards.
• These devices can be used by
children aged 8 years and up as
well as individuals with reduced
physical, sensory or mental abili-
ties or a lack of experience and/
or knowledge if they are super-
vised or have been instructed in
the safe use of the device and
have understood the resulting
hazards. Children must never
play with the device. Cleaning
and user maintenance must not
be carried out by children unless
they are supervised.
Children should be supervised to
ensure that they do not play with
the device.
• Contamination of the liquid can
occur when the lubricant leaks
out.
• See further information in the
section on "Maintenance and
cleaning".

Areas of Application

The dirty water submersible pump is a
drainage pump and designed for trans-
porting water and sewage water (max.
particle size 35 mm) up to a temperature
of max. 35 °C.
It is suitable e.g. for pumping around and
pumping out basins and containers, for
pumping out looded cellars, and for ex-
tracting water from wells and shafts.
This equipment is not suitable for industrial
use. Industrial use will invalidate the guar-
antee.
Any other use, not expressly authorised in
these instructions, may cause damage to
the equipment and represent a serious risk
for the user.
The pump is not suitable for continuous
operation. Continuous operation reduces
the durability and shortens the guarantee
period.
The operator or user is responsible for ac-
cidents or damage to other people or their
property.
The manufacturer shall not be liable for
damages caused by use other than for
which the equipment is intended or by in-
correct operation.
GB
MT
31

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis