Waste Disposal And Environmental Protection; Spare Parts/Accessories - Parkside PHDVS 6 A1 Originalbetriebsanleitung

4. Attach the extension hose (1)
with the Quick-Connect adapter
for the spray gun side (third-
party equipment) onto the spray
gun.
5. Screw the Quick-Connect adap-
ter for the hose side (third-party
equipment) (4) into the hose con-
nector with an inner thread (7).
6. By pulling, remove the securing
clip for the original Quick-Con-
nect hose connector (5) from the
Quick-Connect adapter for the
hose side (third-party equipment)
(4).
7. Insert the original high pressure
hose into the Quick-Connect
adapter for the hose side (third-
party equipment) (4).

Spare parts/Accessories

Spare parts and accessories can be obtained at
If you do not have internet access, please contact the Service Centre via telephone (see
"Service-Center" page 29). Please have the order number mentioned below ready:
3 Quick-Connect adapter for spray gun side
(third-party equipment) ......................................................... 91105126
4 + 5 Quick-Connect adapter for hose side (third-party equipment)
+ Securing clip for the original Quick-Connect hose connector .. 91105125
6 Adapter for gun side ........................................................... 91104572
8 Quick-connect adapter ......................................................... 91103745
Waste disposal and
environmental protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have inished with
them.
www.grizzly-service.eu
8. Secure the connection by in-
serting the securing clip for the
original Quick-Connect hose
connector (5) into both holes in
the Quick-Connect adapter for
the hose side (third-party equip-
ment) (4).
9. Check the connections by pulling
on the high-pressure extension
hose (1).
To help loosen the hose connec-
tor with inner thread (7), you
can use an open-ended spanner
(SW20).
GB MT
27