Herunterladen Inhalt Inhalt Diese Seite drucken

Series Phd 150, Phd 100 Without Quick-Connect Connection System; Connect Connection System - Parkside PHDVS 6 A1 Originalbetriebsanleitung

Hochdruckverlängerungsschlauch
Vorschau ausblenden Andere Handbücher für PHDVS 6 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 30
GB
MT
Series
PHD 150 A1, PHD 150 B2,
PHD 150 C2, PHD 150 D3.
PHD 100 A1, PHD 100 B2,
PHD 100 C2, PHD 100 D2.
Quick-connect adapter (8) and Adapter for
gun side (6).
Connecting to PARKSIDE high-pressure
cleaners (without quick-connect connection
system):
1. Unscrew the quick-connect adap-
ter (8) from the hose connection
with the internal thread (7). You
can hold an open-ended span-
ner (WAF20) against the hose
connection with internal thread
(7).
2. Insert the quick-connect adapter
(8) in the quick-connect hose
connection (2) of the high-pres-
sure extension hose (1). You can
hear it click into place.
3. Screw the original hose of your
high-pressure cleaner onto the
quick-connect adapter (8).
4. Screw in the adapter for the gun
side (6) into the hose connection
with internal thread (7). You can
use a hexagon socket wrench
(AF5) on the adapter for the
gun side (6) and an open-ended
spanner (AF20) on the hose con-
nection with internal thread (7)
to help you.
5. Mount the high-pressure exten-
sion hose (1) between the guns
and the high-pressure hose of
your high-pressure cleaner.
6. Check the connections by pulling
on the high-pressure extension
hose (1).
26
7. To release the connection on the
quick-connect adapter (8), press
the release button (9) and pull
off the high-pressure extension
hose (1).
After being released on the guns
with a hexagon socket wrench
(AF5), the adapter for the gun
side (6) can be easily unscrewed
from the hose connection with
internal thread (7).
Third-party manufacturers
Quick-Connect adapter for hose side (third-
party equipment) (4) with securing clip for
the original Quick-Connect hose connector
(5).
Quick-Connect adapter (8) with Quick-
Connect adapter for spray gun side (third-
party equipment) (3).
Connecting to high-pressure cleaners of
other manufacturers (with quick-connect
connection system):
1. Unscrew the quick-connect adap-
ter (8) from the hose connection
with the internal thread (7). You
can hold an open-ended span-
ner (WAF20) against the hose
connection with internal thread
(7).
2. Insert the quick-connect adapter
(8) into the quick-connect hose
connection (2) of the high-pres-
sure extension hose (1). You can
hear it click into place.
3. Screw the Quick-Connect adap-
ter for the spray gun side (third-
party equipment) (3) onto the
Quick-Connect adapter (8).

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis