Electrolux EYT11012CB Gebrauchsanweisung Seite 5

1.5 Respecting this indications, will
mantain the warranty rights,
ensures the declared properties
of the products and warrant the
complete reliability.
• Before assembling the
!
OK
OK!
• Don't tighten by tools.
• Hand-tighten O-ring
2 x Ø
• Don't set the hose in
NO!
• Tighten the hose
• Prolonged contact wit
hose, please check the
appropriate crimping
of both sides of the
hoses.
!
OK
OK!
seal connectors until
feeling a mechanical
rest.
the wall.
without any twis or
2 x Ø
tension.
any substance, even
scarcely aggressive, can
cause external braid
damage and subsquent
flexible burst.
• Before bending the
2 x Ø
hose please consider a
straight part of 2 times
the external diameter.
• Mantain minimum bend
radius (DN= nominal
internal diameter):
DN6 = 25mm
DN8 = 30mm
DN10 = 35mm
DN13 = 45mm
• Hand-tighten
connectors with gasket
seal (nuts) then apply
1/4 turn using an
appropriate wrench.
OK !
OK!
• Do not expose the
hose to lateral stress
nor overtight by any
tool (ex. during the
installation of the
faucet stud or the drain
pop-up lever).
NO!
ENGLISH 5