Pre-Installation Information - Electrolux EYT11012CB Gebrauchsanweisung

4 www.electrolux.com
1. PRE-INSTALLATION
1.1 Important !
Qualified staff should read very carefully
these instructions before installation
and/or maintenance of the product.
1.2 Important !
Read the installation manual of the
primary system placed inside the
package of the boiler.
1.3 Before installation and setting to
work
Attention ! The feeding pipes have
to be rinsed thoroughly before the
installation of the mixer, so that no
shavings, welding or hemp residual
or other dirt can be found in the
pipes. Foreign bodies can enter the
mixer through the rinsed pipes or the
general water plant and could damage
the washers/ring washers. In order to
guarantee a long use of the product,
install the angle valve equipped with
filter and clean them regularly.
Before the setting to work, unscrew the
aerator and rinse it very well.
Technical data
• Maximum working pressure 5 bar
• R ecommended working pressure 3 bar
(in case of water pressure above 5 bar
install pressure reducers, not supplied)
1.4 Package content (Image 1)
A - Mixer
B - Base
C - Fastening set
D - Spacer for the fastening
E - Gaskets