Disposal - Parkside PKSA 20-Li A1 Originalbetriebsanleitung

Disposal

The packaging is made from environmen-
tally friendly material which can be dis-
posed of at your local recycling plant.
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner.
Do not dispose of batteries in your
normal household waste!
Remove the batteries from the tool before disposal.
Defective or worn-out rechargeable batteries must
be recycled according to Directive 2006/66/EC.
Take the battery pack and/or tool to a nearby
collection facility.
Please consult your local authorities regarding suita-
ble disposal of worn-out power tools/battery packs.
Dispose of lubricants and cleaning agents in an
environmentally friendly manner. Observe the legal
regulations.
■ Dispose of lubricant residues at a disposal
point. Do not allow lubricants to get into drains
or watercourses. Do not allow them to get into
the subsoil/soil. Make sure you use a suitable
mat/surface.
■ Dispose of lubricants in accordance with official
regulations.
■ Dispose of contaminated maintenance material
and consumables at a collection point provided
for this purpose.
PKSA 20-Li A1
Dispose of the packaging in an envi-
ronmentally friendly manner.
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary.
The packaging material is labelled
with abbreviations (a) and numbers
(b) with the following meanings:
1–7: plastics,
20–22: paper and cardboard,
80–98: composites
Your local community or municipal
authorities can provide information on
how to dispose of the product.
The product is recyclable, subject to
extended producer responsibility and
is collected separately.
GB │ IE │
49 ■