Connections
Connectable Equipment
DNW-7/P/
90/P/90WS/WSP
DVW-700/P/
700WS/WSP
Camcorder
Notes
• Connecting the CA-755/755P to a DVW-700/700P/
700WS/700WSP requires an upgrade of the ROM on
the AT-84 board to version 2.11 or higher.
• VTR recording or playback on the Camcorder is not
possible when the CA-755/755P is connected to a
CCU-550/550P/700/700P.
• "CAM?" may appear for several seconds in the
camera viewfinder on the Camcorder when system
synchronization is destabilized, as when the
Camcorder is turned on, or when the reference video
signal to the GENLOCK IN connector on the
Camcorder is input or interrupted.
This message, however, does not indicate a camera
malfunction.
Triax cable
CAMERA
(10 meters (34 ft) or more)
CAMERA
Triax connector
DC cord
(supplied with the AC-550/550CE)
DC IN11.5 -17.0V
CCU-550/550P
Camera Control Unit
CCU-700/700P Camera Control Unit
AC-550/550CE AC Adaptor
DC OUT
9(E)