Adjusting The Volume; Eléments De Commande; Making And Receiving Calls - Conrad bt 20 Bedienungsanleitung

Eléments de commande
42

Adjusting the Volume

During a call, you can adjust the volume of the headset via the volume
button. The headset has three volume levels: high, medium and low.
Press the volume button. The headset volume switches between
the following sequences: Low, medium, high, medium, low, medi-
um, high.
Making and Receiving Calls with a Bluetooth Mobile Phone
After pairing the headset with your mobile phone, you can receive
and make calls within a radius of approx. 10 m.
In order to make a call, proceed as follows:
1. Make sure that the mobile phone and the headset are within the
range.
2. If your mobile phone supports voice control, press the on/off but-
ton of the headset once. Once you hear a beep, you can enter the
number as usual via voice control.
3. If your mobile phone does not support voice control, enter the
number via the keypad of the mobile phone or take it from the
phonebook.
4. After the call is established, it is transmitted automatically to your
headset.
5. You can terminate the call by pressing the on/off button of the
headset once.
31