X32 Setup - Behringer X-DANTE Schnellstartanleitung

6. X32 Setup

The following four X32 screens have to do with configuring the
X-DANTE and the signals to/from the card.
•
The SETUP/card screen shows a graphic of the X-DANTE card
when it has been installed correctly, and offers advice
on setup.
•
The SETUP/config page selects the synchronization source
and shows status indicators in the top 'global' area
(which should normally be "C" for X-DANTE Card).
•
The ROUTING/home page allows patching of signals from the
X-DANTE card to the Input Channel processing.
(e.g. channel 1-4 on Aux In)
17
Quick Start Guide