Connector Plate - Behringer X-DANTE Schnellstartanleitung

12
EXPANSION CARD X-DANTE

4. Connector Plate

•
2x RJ45 connectors with integrated LEDs
•
ACT/LINK LED (green) lights green when valid IP network
connection exists.
•
1 G LED (amber) lights when used in 1 GBit/s network.
•
2x small handles (St) for removing the expansion card from
the slot
•
2x outer screws for fixing the card in the slot (M3 x 6 size).
•
3x countersunk screws fixing the PCBA to the bracket.
Do not remove these!