Introduction; Intended Use; Operating Components (Fig . A); Accessories (Fig . B) - Parkside PDMH 4500 B5 Originalbetriebsanleitung

AIR HAMMER PDMH 4500 B5

Introduction

Congratulations on the purchase of your new appli-
ance . You have chosen a high-quality product . The
operating instructions are part of this product . They
contain important information about safety, usage
and disposal . Before using the product, please
familiarise yourself with all of the operating and
safety instructions . Use the product only as de-
scribed and for the range of applications specified .
Please also pass these operating instructions on to
any future owner .

Intended use

The air hammer is suitable for working on plaster,
concrete, tiles, as well as for cutting and slotting
sheet metal .
Any other usage or modification of the appliance
is deemed to be improper and carries a significant
risk of accidents . The manufacturer accepts no
responsibility for damage(s) resulting from improper
usage . This appliance is intended for domestic use
only .
Symbols on the compressed air tool:
WARNING! Read the operating instructions
before use .
Wear a dust mask .
Always wear eye protection when
using or maintaining the compressed
air tool .
Always wear ear muffs .
Always wear protective gloves .
Oil regularly
■ 26 │ GB │ MT
Operating components
(See fold-out page for illustrations)
1 Thread
2 Connector nipple (pre-fitted)
3 Trigger
4 Tool holder
Accessories (Fig . A)
5 Chisel
6 Tension spring
7 Oil container

Package contents

1 air hammer
3 120 mm round shank chisels
1 connector nipple (pre-fitted)
1 tension spring
1 oil container (only 1x included in the set)
1 set of operating instructions

Technical specifications

Working pressure
Air consumption
Stroke length
Stroke rate
Mounting
Compressed air supply
Weight
(without accessories)
Noise emission value
Noise measurement value determined in accord-
ance with ISO 15744 . The rated noise level of the
tool is typically as follows:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
Wear ear muffs!
Total vibration value
Vibration values determined in accordance with
ISO 28927-9 and EN 12096:
Vibration emission value a
Uncertainty K = 1 .06 m/s
h
max . 6 .3 bar
460 l/min
41 mm
max . 4500 rpm
10 .2 mm (round shank)
1/4"
approx . 1 .08 kg
L = 99 .3 dB (A)
pA
K = 3 dB
pA
L = 110 .3 dB (A)
WA
K = 3 dB
WA
≤ 12 .04 m/s
2
h
2
PDMH 4500 B5