Installation - Epson C824431 Bedienungsanleitung

The C824431/C824432 interface card is designed to be
installed inside the printer. Installation or removal of the
interface board is easy, and requires only a screwdriver.
The following section gives you detailed information on
how to install your interface card in a variety of EPSON
printers.
Caution
• Turn off the power to the printer and the computer
before installing the serial interface. Make sure that all
power and interface cables are removed.
• Avoid touching the printer's circuit board contacts, as
many of these components are sensitive to static electric
charges that may build up on your body.
1. First, you may need to adjust the DIP switches and
jumper settings.
If the screws don't fit your interface cable, you will need
to replace the connector lock nuts with the optional ones
provided in this package.
Note
The original C824431 lock nuts are imperial standard (inch),
and the C824432 lock nuts are metric.

INSTALLATION

22