Switching on/off
Switching on/off
On
Off
Cleaning and care
Before cleaning or carrying out any maintenance:
¾
–
Set the rotation direction switch 5 to the middle position. This
prevents unintentional switching on.
–
Remove the USB cable 9 .
–
Remove the bit 12.
–
Disconnect the charger 8 from the power socket.
No acid, chafing or solvent cleaning agents should be used or the
¾
product can be damaged.
Clean the housing of the product using a soft, dry cloth only!
¾
Ensure moisture does not enter the product during cleaning to
¾
prevent damage to the product and related repairs.
At persistent soiling, a mild cleaning agent can be used.
¾
Action
Pull the switch trigger 10 and hold it in place.
The LED light 11 lights up.
Release the switch trigger 10.
The LED light 11 goes off.
GB
27