Introduction; Proper Use; Features And Equipment - Parkside PMFW 200 Bedienungs- Und Sicherheitshinweise

Introduction

the following pictograms are used in these operating instructions / on the device:
Read the operating instructions!
Always heed warning labels and
safety instructions!
Caution - Danger of electric shock!
Hazardous voltage – danger to life!
Explosive material!
Risk of fire!
V ~
Volt (AC)
W
Watts (effective power)
Multi­function tool
Introduction
Q
Please make sure you familiarise yourself
fully with the way the device works before
you use it for the first time and that you
understand how to handle electrical power tools
correctly. To help you do this please read the accom-
panying operating instructions. Keep these instructions
in a safe place. If you pass the device on to anyone
else, please ensure that you also pass on all the
documentation.

Proper use

Q
The device is intended for sawing, cutting and sand-
ing. The preferred materials on which the device
can be used are: wood, plastic, drywalling, non-fer-
rous metals, fixings (e.g. nails, screws) and wall
tiles. It is particularly suitable for working close to
26 GB/MT
n
Rated idle running speed
0
Safety class II
Wear hearing protection, dust protec-
tion mask, protective glasses and
protective gloves.
Keep children away from electrical
power tools!
Protect electrical power tools from
moisture!
Risk of loss of life by electric shock
from damaged mains lead or mains
plug!
Dispose packaging and appliance in
an environmentally-friendly way!
edges and precise work. Any other use or modifi-
cation to the device shall be considered as improper
use and could give rise to considerable dangers. We
will not accept liability for loss or damage arising
from improper use. Not suitable for commercial use.

Features and equipment

Q
ON / OFF switch
1
Oscillation speed setting wheel
2
Dust extraction port
3
Ventilation slots
4
Tool mount
5
Clamping screw with washer
6
Plunge saw blade
7
Allen key
8
Sanding sheet
9
Backing plate
10
Segment saw blade
11
Adapter for external vacuum extraction
12
Reducer piece
13