Usb Devices; Dab Reception (Cd-Nt670D Only) - Yamaha CD-NT670 Bedienungsanleitung

Troubleshooting

USB devices

Problem
The unit does not detect the USB device.
Folders and files in the USB device cannot
be viewed.

DAB reception (CD-NT670D only)

Problem
Cannot tune into any DAB stations.
The initial scan operations are not
successful and [Not Found] is shown on
the front panel display.
There is noise interference (e.g. hiss,
crackle or jitter)
The DAB station information is not shown
or is inaccurate.
50
En
Cause
The USB device is not connected to the USB jack securely.
A USB device in a format other than FAT16/32 format is used.
The data in the USB device is protected by the encryption.
Cause
The initial scan operations were not performed.
The DAB signals are too weak.
The positioning of the antenna is not optimal for DAB reception.
There is no DAB coverage in your area.
The antenna needs to be repositioned.
The DAB signals are too weak.
The DAB station may be temporarily out of service, or the DAB station
information is not provided by the DAB broadcaster.
Solution
Turn off the unit, reconnect your USB device, and turn the unit on again
( P.22).
Use a USB device with FAT16 or FAT32 format.
Use a USB device without an encryption function.
Solution
Perform the initial scan operations ( P.26).
Use the DAB Tune Aid feature to conform the best position of the antenna
( P.22).
Check with your dealer or WorldDMB online at http://www.worlddab.org
for a listing of the DAB coverage in your area.
Readjust the position of the antenna ( P.9).
Use the DAB Tune Aid feature to conform the best position of the antenna
( P.29).
Contact the DAB broadcaster.