Playing Back Music On Usb Devices - Yamaha CD-NT670 Bedienungsanleitung

Playing back music on USB devices

This unit allows playback USB devices which music files are recorded.
For details on playable USB devices, see "Supported devices/medias" (P.53).
1
Turn INPUT to select [USB] or press
on the remote control.
2
Connect a USB device to the USB port.
3
Browse and select a song.
Shows other item.
Confirms the selected item and proceeds
ENTER/
to the next level or start playback.
HOME Shows the top-level item.
Returns to the previous item.
Finishes browsing and displays the
DISPLAY
playback content information.
4
Playback starts.
Play/pause
/ Moves to the next or previous song in the
folder.
Stop
SHUFFLE Starts shuffle playback (
REPEAT Starts repeat playback (
22
En
2
1
USB
P.37).
P.37).
• Some USB devices may not work properly even if
they meet the requirements. Playability of and
power supply to all USB devices are not
guaranteed.
• Yamaha and suppliers do not accept any liability
for the loss of data saved on a USB device
connected to the unit. As a precaution, it is
1
recommended to make backup copies of
important files.
INPUT
• Stop playback before disconnecting the USB device.
• A USB device is automatically charged when it is
connected to the unit, except in the eco standby
mode. However, depending on the device design,
the current supplied from the port may be limited
to 500 mA, or the device may not be charged.
3 4
,