Parkside PDRS 6.3 B2 Originalbetriebsanleitung Seite 46

■ DANGER! Avoid contact with an energised line! This tool is not
insulated against electric shock .
WARNING – RISK OF INJURY!
► Under certain circumstances, high working pressures can cause
kickback to occur . This can cause hazards due to the continu-
ous loading .
■ If you are inexperienced with the appliance, seek training in how
to use it safely .
WARNING – RISK OF INJURY!
► RISK OF PUNCTURE WOUNDS! Do not treat an injection
wound as a simple cut .
A high-pressure jet can inject toxins into the body and cause
serious injuries . In the event of an injection into the skin, seek
medical assistance immediately .
■ The compressed air tool must not be modified in any way without
the manufacturer's approval .
■ Use the compressed air tool only with the specified pressure
(6 .3 bar) .
■ The compressed air tool must always be disconnected from the
air supply after use and for as long as it is not in use .
■ The compressed air tool must not be used if it is not airtight or if it
requires repair .
■ Never connect the compressed air tool with a compressed air
hose that exceeds a pressure of 6 .3 bar .
■ Keep work area clean and well lit . Cluttered or dark areas invite
accidents . This enables better control of the tool in unexpected
situations .
PDRS 6.3 B2 GB │ MT │ 43 ■