Herunterladen Diese Seite drucken

Cue Point Settings; Réglage D'un Point De Repérage - Pioneer cdj-800 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für cdj-800:

Werbung

BASIC OPERATION / DEMARCHES DE BASE
DJ PLAYER OPERATION
LOOP IN
REALTIME
CUE
TEMPO ±10/
±100 WIDE
MASTER
TEMPO
TRACK
SEARCH
4, ¢
SEARCH
1, ¡
CUE
PLAY/PAUSE
6
Jog dial

Cue Point Settings (*)

Once a Cue point has been stored in memory, during playback it can be used to
place the player in a state where it is ready to begin playback from the cueing
position by pressing the CUE button.
7 Setting the Cue point in the CDJ mode
1. During playback, press the PLAY/PAUSE button (3/8) to
pause playback at the point you wish to begin playback.
2. Search for the precise position of the Cue point.
÷ Using frame numbers to specify Cue points.
Cue points may be specified in 1-frame units (where 75 frames are equiva-
lent to 1 second).
Use the Jog dial or the forward or reverse SEARCH button (1, ¡) to
advance to the desired frame. Rotating the Jog dial once causes the player
to advance or rewind 135 frames in the specified direction.
÷ Listen to the sound at the current frame to determine the Cue
point.
Turn the Jog dial slowly and then return it to just before the point from
which you wish to begin playback. (The cue point thus defined will consist
of that point diectly after the sound which can be heard during a cueing
pause.)
3. Press the CUE button when you reach the desired frame
number or hear the sound at the point from which you
wish to begin cueing.
÷ When the sound is muted and the [CUE] indicator lights up, the Cue point
will have been stored to memory.
÷ Each time a new Cue point is stored to memory, the previous Cue point will
be erased.
[Amending the Cue point]
1. During playback, press the CUE button.
÷ This will take you back to the set track position.
2. In the CDJ mode, to set the Cue point, go through steps 2
and 3 as mentioned above.
20
<DRB1332>
En/Fr
UTILISATION DU LECTEUR DJ
JOG MODE VINYL
TEMPO
Une fois qu'un point de repérage a été mémorisé, pendant la lecture, il peut servir
pour mettre le lecteur dans un état où il sera prêt à commencer la lecture à partir
du point repéré par une pression sur le bouton CUE.
7 Réglage du point de repérage en mode CDJ
1. Pendant la lecture, appuyez sur le bouton PLAY/PAUSE
2. Localisez la position exacte du Point de repérage.
3. Appuyez sur le bouton CUE quand vous arrivez au
[Modification d'un Point de repérage]
1. Pendant la lecture, appuyez sur le bouton CUE.
2. En mode CDJ, effectuez les étapes 2 et 3 ci-dessus pour
LOOP IN
REALTIME
CUE
TEMPO ±10/
±100 WIDE
MASTER
TEMPO
TRACK
SEARCH
4, ¢
SEARCH
1, ¡
CUE
PLAY/PAUSE
6
Bague Jog
Réglage d'un point de repérage (*)
(3/8) pour interrompre la lecture au point où vous
voulez la faire commencer.
÷ Utilisation des numéros de cadre pour spécifier les Points de
repérage.
Vous pouvez spécifier ces points en unités de cadre (75 cadres correspon-
dent à 1 seconde).
Servez-vous de la bague Jog ou du bouton SEARCH avant ou arrière (1,
¡) pour passer au cadre voulu. Une rotation de la bague Jog fait avancer
ou reculer le lecteur de 135 cadres dans le sens spécifié.
÷ Écoutez le son au cadre actuel pour déterminer le Point de
repérage.
Tournez lentement la bague Jog et ramenez-la juste avant le point où vous
voulez commencer la lecture. (Le point de repérage ainsi posé sera le point
directement après le son audible pendant une pause de repérage.
numéro de cadre voulu ou que vous entendez le son au
point à partir duquel vous voulez commencer le
repérage.
÷ Si le son est mis en sourdine et que le voyant [CUE] s'allume, le Point de
repérage sera mémorisé.
÷ Chaque fois qu'un nouveau Point de repérage est mémorisé, le précédent
est effacé.
÷ Vous repasserez ainsi à la position de plage définie.
définir le Point de repérage.
JOG MODE VINYL
TEMPO

Werbung

Fehlerbehebung

loading