Tips And Tricks; Maintenance And Cleaning - Parkside PMGS 12 C3 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

Examples of appropriate tool selection Function:
Function
Drilling
Milling
Engraving
Polishing, derusting
CAuTION!
Use only the lightest
contact pressure of
the tool on the
workpiece.
Cleaning
Grinding
Cutting and sawing
Be sure not to exceed the maximum diameter of
composite abrasive wheels and grinding cones
and cylinders with 55 mm thread insert, and
the 80 mm maximum diameter of sandpaper
grinding accessories.
Note: The max. permissible mandrel length is
33 mm.
Store accessories inside the original box or oth-
erwise protect the accessories from damage.
Store accessories dry and away from aggres-
sive media.

Tips and tricks

Applying excessive pressure can cause the in-
stalled tool to break and / or damage the work
piece. Optimal results can be achieved by ap-
Accessory Application
HSS drill Drilling wood
12
Milling bits Various tasks, e.g. hollowing out, goug-
20
ing, shaping, grooving or slotting
Engraving Making marks, craft projects
bits (see Fig. D)
21
Metal brush Derusting
16
Polishing wheel Working on various metals and plastics,
in particular noble metals like gold or
14
silver (see Fig. E)
Plastic brush
E.g. cleaning complex plastic housings
19
or the area around a door lock
Grinding
Grinding work on stone, wood; fine
wheels work on hard materials such as ceramic
15
or alloyed steel (see Figs. F, G)
Grinding bits
22
Cutting discs
Cutting metal,
17
plastic or wood
Operation / Maintenance and cleaning
plying the tool to the work piece at a steady
speed range and little pressure.
Hold the device with both hands whilst cutting.
Please note the data and information in the
chart to prevent the spindle end touching the
perforated plate of the grinding tool.

Maintenance and cleaning

Q
The device is maintenance-free.
C lean all the dirt off the drill / grinder. Use a
dry cloth for cleaning.
Projection
(min–max) mm
18–25 when us-
ing the smallest
drill the projection
is 10 mm
18–25
18–25
9–15
12–18
9–15
12–18
10
12–18
GB 15