Herunterladen Inhalt Inhalt Diese Seite drucken

LG 18K BTU Anleitung Seite 8

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 73
• Drill the piping hole with 70mm dia, hole
core drill.
• Piping hole should be slightly slant to the
outdoor side.
INSULATION, OTHERS
THERMAL INSULATION
INDOOR UNIT
Union for liquid pipe
Union for gas pipe
REFRIGERANT PIPE
• Insulate and tape both the gas piping and
liquid piping.
TEST AND CHECK
After all workings are finished, check the working and operation.
• Air distribution
• Drain
• Gas leakage
• Wiring
• Lock-bolt
Insulate the joint and tubes completely.
All thermal insulation must comply with local requirement.
Refrigerant pipe and thermal
insulator(Local supply)
Hose crip for thermal insulator
(Local supply)
Thermal insulator for refrigerant pipe
(Local supply)
Is the air circulation good?
Is the drainage smoothly and no sweating?
Is the piping connection correctly?
Is the wiring connection correctly?
Is the lock-bolt of compressor loosened?
8
WALL
Indoor
Thermal insulator for refrigerant pipe
(Local supply) Thermal insulator for
Hose crip for thermal insulator(Local supply)
Make sure that there is no clearance here.
Power cable
Liquid pipe
Thermal insulator
Outdoor
5~7mm
piping(Local supply)
Overlap with thermal
insulator for piping.
Tape
Gas pipe

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

24k btu36k btu60k btu

Inhaltsverzeichnis