Trouble Shooting; Spare Parts/Accessories; Fault Correction - Parkside PAS 1200 B2 Originalbetriebsanleitung

GB IE

Trouble shooting

Problem Possible cause
Mains voltage is not present
The equipment is not switched on
Device does
not start
Safety stop due to missing or incor-
Defective on/off switch (
Defective motor
Suction hose (
tube (
Metal container (
Low or lack
Metal container (
of suction

Spare Parts/Accessories

Spare parts and accessories can be obtained at
If you do not have internet access, please contact the Service Centre via telephone (see
"Service-Center" Page 26). Please have the order number mentioned below ready.
Position instruction
manual
14
15
16
1
13
24
14) or suction
15) blocked
13) is not closed Close the metal container
13) is full
16) is clogged
18) is clogged
www.grizzly-service.eu
Position exploded
drawing
8
9
5
2
6+7

Fault correction

Check plug socket, power cord, line,
plug and fuse, where appropriate,
repair through electrical specialist
Switch on the equipment (see
"Switching on/off")
16) "Cleaning/Maintenance")
8)
Repair through customer service
Remove obstructions and blockages
Empty the metal container (see
"Cleaning/Maintenance")
(see "cleaning/maintenance")
(see "Cleaning/Maintenance")
Description
Metal suction hose
Suction tube
Metal container
Order No.
91099243
91099242
91102910
10 23
91102911