Dispensing The Adhesive; Removing The Cartridge - Vieweg 990268-X Bedienungsanleitung

Operating Manual 990268-X
Dispenser DP

4.3 Dispensing the adhesive

Dispensing the adhesive
Dispenser DP
Press the trigger (9). Dispensing is started,
and the red dispense volume indicator (4)
Dispensing the adhesive
moves forward. When the trigger (9) is
released, dispensing stops.
Press the trigger (9). Dispensing is started,
and the red dispense volume indicator (4)
moves forward. When the trigger (9) is
The dispense volume can be controlled by means of the
released, dispensing stops.
pressure reducing valve (10).
a) Pull the pressure reduction valve.
The dispense volume can be controlled by means of the
b) Adjust the dispense volume by turning the
pressure reducing valve (10).
adjuster in the + or – direction.
c) Press the pressure reduction valve to confirm
a) Pull the pressure reduction valve.
the set value.
b) Adjust the dispense volume by turning the
adjuster in the + or – direction.
c) Press the pressure reduction valve to confirm
the set value.
Do not remove, tamper or manipulate pressure limiting valve and
strictly respect pressure limits.

Removing the cartridge

Do not remove, tamper or manipulate pressure limiting valve and
strictly respect pressure limits.
4.4 Removing the cartridge
Release the trigger (9) and press the red
button (13) until the feed plungers have
Removing the cartridge
retracted to the back end-stop. Using the
release button (7), push the cartridge
Release the trigger (9) and press the red
out of the cartridge retainer and
button (13) until the feed plungers have
pull it upwards out of the unit.
retracted to the back end-stop. Using the
release button (7), push the cartridge
out of the cartridge retainer and
Dispose of the cartridge and mixer in conformity with the
pull it upwards out of the unit.
manufacturer's specifications.
Dispose of the cartridge and mixer in conformity with the
manufacturer's specifications.
22905825v3
2009-03 (V 2.0)
19
9
VIEWEG
Sulzer Mixpac AG
Sulzer Mixpac AG
EN