Operation Of The Dispenser; Insert Cartridge; Connect The Dispenser To The Compressed Air Supply - Vieweg 990268-X Bedienungsanleitung

VIEWEG
Dispenser DP
Dispenser DP
4.

Operation of the dispenser

4 Operation of the dispenser
4.
Operation of the dispenser

Insert cartridge

4.1 Insert cartridge
Insert cartridge
EN
Push the cartridge into the cartridge
sleeve as shown in the drawing and
Push the cartridge into the cartridge
press it down until it clicks into
sleeve as shown in the drawing and
position. To remove the cartridge
press it down until it clicks into
stopper, unscrew the cap nut of the
position. To remove the cartridge
cartridge.
stopper, unscrew the cap nut of the
cartridge.
Fasten the mixer using the cap nut on
the cartridge outlet thread.
Fasten the mixer using the cap nut on
the cartridge outlet thread.

Connect the dispenser to the compressed air supply

Connect the dispenser to the compressed air supply
4.2 Connect the dispenser to the compressed air supply
Connect the compressed air hose to the compressed air inlet via the
quick-release coupling.
Connect the compressed air hose to the compressed air inlet via the
quick-release coupling.
22905825v3
2009-03 (V 2.0)
22905825v3
2009-03 (V 2.0)
Never insert the cartridge while the dispenser is
connected to the compressed air supply.
Never insert the cartridge while the dispenser is
connected to the compressed air supply.
If the cartridge is not in the correct position, the trigger (9)
cannot be pressed.
If the cartridge is not in the correct position, the trigger (9)
cannot be pressed.
Operating Manual 990268-X
8
18
8
Sulzer Mixpac AG
Sulzer Mixpac AG