Preparing The Dispenser - Vieweg 990268-X Bedienungsanleitung

Operating Manual 990268-X
Dispenser DP
Dispenser DP

Preparing the dispenser

3.4 Preparing the dispenser
Preparing the dispenser
• Remove the protective cap (11) from the pressure
reduction valve (10).
• Remove the protective cap (11) from the pressure
• Install a ¼" BSP adapter (external thread) on the inlet
reduction valve (10).
side of the pressure reduction valve, ready for the
• Install a ¼" BSP adapter (external thread) on the inlet
quick-release coupling.
side of the pressure reduction valve, ready for the
• Use a highly flexible pneumatic hose of size DN6 with
quick-release coupling.
a quick-release coupling matching the adapter.
• Use a highly flexible pneumatic hose of size DN6 with
a quick-release coupling matching the adapter.
22905825v3
2009-03 (V 2.0)
22905825v3
2009-03 (V 2.0)
The dispenser operates under high pressure. Failure to
follow the instructions in this Manual can lead to
The dispenser operates under high pressure. Failure to
inadvertent release of pressure, or breakage of the
follow the instructions in this Manual can lead to
dispenser at high pressure and may result in serious
inadvertent release of pressure, or breakage of the
personal injury to the user or bystanders and/or property
dispenser at high pressure and may result in serious
damage.
personal injury to the user or bystanders and/or property
damage.
Caution: DANGER OF CRUSHING.
Never place your hands or fingers between the plunger
Caution: DANGER OF CRUSHING.
and the cartridge.
Never place your hands or fingers between the plunger
and the cartridge.
The input pressure of the compressed air must not exceed
max. 8 bar (max. 120 psi). Requirements for the
The input pressure of the compressed air must not exceed
compressed air supply (see Technical Data).
max. 8 bar (max. 120 psi). Requirements for the
compressed air supply (see Technical Data).
Strictly follow the manufacturer's safety instructions for the
2-component adhesive.
Strictly follow the manufacturer's safety instructions for the
2-component adhesive.
7
7
17
VIEWEG
Sulzer Mixpac AG
Sulzer Mixpac AG
EN