Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Ordering Of Spare Parts; Ordering Replacement Parts; Storage; 1. Disposal And Recycling - Parkside PDMH 4500 A2 Bedienungs- Und Sicherheitshinweis

Vorschau ausblenden Andere Handbücher für PDMH 4500 A2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 74
9. Cleaning and ordering of
spare parts
Important: Disconnect the equipment from the
compressed air supply before you carry out any
maintenance or cleaning work.
Personal safety equipment such as gloves and
a protective dust mask must also be worn when
you carry out servicing or cleaning work on the
machine in order to prevent danger from dust
deposits.
9.1 Cleaning
Keep all safety devices, air vents and the
motor housing free of dirt and dust as far as
possible. Wipe the equipment with a clean
cloth or blow it with compressed air at low
pressure.
We recommend that you clean the device
immediately each time you have finished
using it.
Clean the equipment regularly with a moist
cloth and some soft soap. Do not use cleaning
agents or solvents; these could attack the
plastic parts of the equipment. Ensure that no
water can seep into the device.

9.2 Ordering replacement parts:

Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
For our latest prices and information please go to
www.isc-gmbh.info

10. Storage

Store the equipment and accessories out of
children's reach in a dark and dry place at above
freezing temperature. The ideal storage tempera-
ture is between 5 and 30 °C. Store the equipment
in its original packaging.
Anleitung_4139033_LB4.indb 13
Anleitung_4139033_LB4.indb 13
GB

11. Disposal and recycling

The unit is supplied in packaging to prevent its
being damaged in transit. This packaging is raw
material and can therefore be reused or can be
returned to the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic. De-
fective components must be disposed of as spe-
cial waste. Ask your dealer or your local council.
The equipment must be disposed of in a way
which does not result in any danger for persons
and the environment.
- 13 -
04.03.13 13:28
04.03.13 13:28

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis