Safety Information - Parkside PSZ 250 A1 Bedienungs- Und Sicherheitshinweise

Safety information

m
WARNING!
Read all safety information,
u
instructions, diagrams and
technical specifications applied to
the product. Failure to follow the safety
information and the below instructions may
result in electric shock, fire and/or serious
injury .
Keep all the safety information and
instructions in a safe place for future
reference.
Keep children and other unauthorized
¾
persons away from the product .
m
DANGER!
Risk of electric shock! Never attempt
u
to repair the product yourself . In case of
malfunction, repairs are to be conducted
by qualified personnel only .
m
DANGER!
Risk of electric shock! Turn off the
u
product and disconnect it from the power
supply before cleaning and when the
product is not in use .
18 GB/IE
m
DANGER!
Risk of injury! Improper use may result
u
in personal injury . Use the product only
as described in the user manual . Never
attempt to alter the product in any way .
m
DANGER!
Risk of injury! Never use a damaged
u
product . Disconnect the product from the
power supply and contact your retailer if
the product is damaged .
Make sure that the nominal voltage on the
¾
rating plate complies with the supply voltage .
If possible, only operate the product on an
¾
electrical circuit protected by a fault current
switch and a fuse of at least 10 A .
The use of extension cords is not
¾
recommended . If the use of an extension
cord is necessary, it must be designed for a
current flow of at least 10 A .
Shield the product, power cord and power
¾
plug from dust, direct sunlight, dripping and
splashing water .
Protect the power cord from damage . Do
¾
not allow the power cord to hang over sharp
corners; do not crush or bend it . Keep the
power cord away from any hot surfaces and
open flames .