Werbung
Item No. / Élément
n° / Artikel-Nr. /
Art.n. / Art.nr. /
Symbol No. / Symbole N° / Symbol-Nr. / Simbolo n. / Symbool nr. / Nº símbolo / Symbol nr. /
Nº artículo /
Simbolo No. / ΑΡ. ΣΥΜΒΟΛΟΥ / Символ № / Symbol č. / Symbol nr. / Symbol nr. / Tunnuksen
Vare.nr. / Artigo
nro / Č. symbolu / Nr znaku / Jelölés-szám / Simbola Nr. / Simbolio Nr. / Št. simbola / İşaret
No. / ΑΡ. ΕΙΔΟΥΣ /
№ детали /
Položka č. /
Artikkel nr. /
Produkt nr. /
Kohta,nro /
Č. položky /
Nr artykułu /
Termékszám /
A
Priekšmets Nr. /
Dalies Nr. /
B
Št. izdelka /
C
Parça No. /
Articol nr. /
Артикул No /
Br. artikla / Osa nr /
Proizvod br.
43128;43136;43139
√
43140;43138;43130
Read the manual and follow the instructions relating to safety tips, correct and
complete product assembly, setting into service, use and maintenance.
For your own safety, always heed the advice and warnings in these
instructions.
Non-compliance with these operating instructions may expose you to serious
danger. Only use the product in the places and conditions for which it is
intended.
• ATTENTION! NO PROTECTION AGAINST DROWING!
• SWIMMERS ONLY!
• Full inflate all air chambers.
• Passenger numbers and load weight shall by no means exceed passenger
number and maximum weight capacity in specifications.
• This product should not be used as life saving device.
• Life saving device (life jacket and life buoy) must be prepared together and
inspected.
• Keep away from flames and fires.
• Before every use, carefully inspect all product components, to ensure
everything is in good condition and tightly secured. Please stop to repair if
you find any damage.
• Be careful when landing on the ground. Sharp and rough objects such as
rocks, cement, shells, glass, etc. may punctured the product.
• Don't leave the product exposed to sun for long periods of time, as high
temperatures shall give rise to air expansion, which can cause irreparable
damage.
• Never leave in or near the water when not in use.
• Evenly distribute loads when use the product. Tipping and drowning may
occur with uneven distribution of loads.
Inflation
1. Before using the product, carefully check if there are any leaks or broken
parts.
Open safety valve and inflate with the air pump (not include) to design
working pressure on the product.
2. Inflate according the numbered air chambers by adult only. Fill the
chambers until most of the wrinkles are gone and it feels firm to touch but
NOT hard. If you use other pressure gauge, the pressure should not be
more than the specified pressure on the product or on the instruction. Do
not over-inflate the product. Do not use an air compressor.
Note: Under and over-inflation of the product will result in safety hazards. It is
better to check the pressure of the product each time before using.
3. Be sure to close the valves after inflation, press in the safety valves after
inflation.
Note: Never stand on or rest objects on the product during inflation. Always
check product for leaks before use.
No. / Simbol nr. / Символ No. / Br. simbola / Sümboli nr / Br. simbola
1
2
3
4
√
0.03
√
√
WARNING
5
6
7
8
14
√
1/0
√
DEFLATION
MAINTENANCE AND STORAGE
1. After deflation, use a damp cloth to gently clean all surfaces.
Note: Never use solvents or other chemicals that may damage the product.
2. Store in a cool, dry place and out of children's reach.
3. Check the product for damage at the beginning of each season and at
regular intervals when in use.
REPAIR
If a chamber is damaged use the provided repair patch.
1. Clean area to be repaired.
2. Carefully peel patch.
3. Press patch over area to be repaired.
4. Wait 30 minutes before inflation.
Comply with standard: EN15649-1, EN15649-2, EN15649-3.
5
9
10
11
12
90
√
13
14
15
√
√
S-S-005242
Werbung
