Herunterladen Inhalt Inhalt Diese Seite drucken

Supplementary Notes; Original Accessories/Auxiliary Equipment; Before Use; Setting The Cut Width Of The Diamond Cutting Discs - Parkside PMNF 1350 B2 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für PMNF 1350 B2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

  • DEUTSCH, seite 44

Supplementary notes

Approved cutting disc designs:
segmented diamond-coated discs with slits
between the segments with a maximum size
of 10 mm and a negative cutting angle:
Disc diameter: 125 mm
Disc thickness: 2.1 mm
Wear hearing protection!
Wear safety goggles!
Wear safety shoes!
Wear protective gloves!
Wear a dust mask!
Not approved for wet grinding!
Original accessories/auxiliary
equipment
Only use the accessories and additional equip-
ment that are specified in the operating instruc-
tions and are compatible with the appliance.
PMNF 1350 B2

Before use

Setting the cut width of the diamond
cutting discs
Loosen the locking screw
Push the depth stop
Press the spindle lock
Use the face spanner
flange
.
Remove the locking flange
Set the desired cut width in accordance with
the number of blotters
is set in place as the top intermediate layer
(see fig. F).
NOTE
There are several spacer washers available
for you. Ensure that the groove width is the total
of the spacer washers between the diamond
cutting discs and the thickness of the cutting
discs.
Please make sure that the backing flange
is fixed well on the shaft. The backing flange
must rotate with shaft.
Please make sure that diamond disc fixed
well on the flanges
Tighten the locking flange
ner
. Press the spindle lock
NOTE
When setting a cut width that is smaller than
the maximum cut width, you must use the
blotters
on the fixing flange side for fixing
the cutting discs since the fixing flange cannot
fix the discs alone on the spindle due to the
thread length (see fig. G).
.
upwards.
and hold it down.
to loosen the locking
.
. Ensure that the flange
+
.
using the face span-
while doing this.
GB │ CY 
 7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis