Parkside PSHL 2 C1 Bedienungs- Und Sicherheitshinweise Seite 9

The welding helmet cannot
„ z
withstand any damages that
are caused by a heavy blow,
explosion or abrasive liquids.
The useful life depends on
„ z
many different individual fac-
tors such as usage, cleaning,
storage and maintenance.
Regular inspections and
replacement in the case of
damage are recommended.
The material used to manufac-
„ z
ture the product will age over
time. This can result in break-
ages on the welding helmet,
for example. As a result of
these damages, the welding
helmet is no longer able to
provide effective protection.
In this case, the user should
replace the welding helmet
immediately.
This product cannot be used for
„ z
overhead welding work and
cutting operations. If this prod-
uct is use for overhead weld-
ing or cutting, the molten metal
drops could burn through the
ADF filter and result in injuries
to the user.
If the filter is faulty, the user
„ z
must stop using the welding hel-
met immediately. Slag splashes
can damage the surface of the
filter and cause injury to the
user's skin or cause other
serious accidents.
This product is temperature
„ z
resistant and hardly inflamma-
ble but in case of direct contact
with naked flames or in case
of access to an object with a
high temperature, the helmet
may begin to burn or melt.
Please store and only use the
welding helmet in the manner
described in order to reduce
such risks.
The ADF filter is an electronic
„ z
product that is not waterproof.
Please ensure it is kept dry and
clean and not stored in a damp
environment.
Improper use could result in
„ z
injury to the use and cause
other types of diseases.
Please examine the filter prior
„ z
to each use. As soon as the
function and appearance seem
defective, they must no longer
be used.
The use of the welding
„ z
helmet is prohibited if the filter
flickers or if the level of dark-
ening no longer corresponds
to the standard value or there
are other abnormal working
conditions.
Safety instructions
GB 9