Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Instructions - Parkside PSHL 2 C1 Bedienungs- Und Sicherheitshinweise

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 89

Safety instructions

z Safety instructions
Please read the operating instruc-
tions with care and observe the
notes described. Familiarise your-
self with the device, its proper
use and the safety notes based
on these operating instructions.
The rating plate contains all tech-
nical data of this welding helmet;
please learn about the technical
features of this product.
Prior to each use, check that it
z
is working properly by pressing
the "Test" button.
The product is not suitable for
z
laser welding.
The product is only approved for
z
use within a temperature range
of between -5°C to +55°C.
The product is not fire-resistant.
z
Welding helmet and ADF filter
z
must not be exposed to any
heat or moisture.
Do not remove the ADF filter
z
from the welding helmet and
never open the housing of the
ADF filter without authorisation
from the manufacturer.
Prior to each use, check
z
whether the Welding/Grinding
setting was selected correctly.
The cover lens must be installed
z
on the outer side of the ADF
8
GB
filter. Otherwise, the ADF filter
can get damaged.
Do not carry out any modifi-
z
cations/replacements on the
welding helmet and ADF filter
without consent.
If the filter does not darken
z
automatically whilst weld-
ing please stop the operation
immediately and contact the
dealers without delay.
Do not use any alcohol, fuel
z
or diluting agents to clean the
ADF filter. Do not place the
ADF filter in water.
The response time of the ADF
z
liquid crystal slows down if the
ambient temperature is lower,
however this does not have
an impact on the protective
functions.
Please replace the housing
z
of the ADF filter immediately
if it is damaged or scratched
because this can impair
visibility and the protective
performance.
Please replace the viewing
z
pane immediately if it is
broken or scratched. Do not
use any hard objects to replace
the viewing pane of the filter.
Regularly clean the surfaces
z
of the ADF filter, sensor and
solar cells.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis