Herunterladen Inhalt Inhalt Diese Seite drucken

Parkside PSHL 2 C1 Bedienungs- Und Sicherheitshinweise Seite 11

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Do not open the welding hel-
z
met under any circumstances.
Do not carry out any repair
work or alterations to the
welding helmet. This work must
only be carried out by trained
specialist personnel.
Before any welding work,
z
please make sure that you have
adjusted the auto-darkening.
The safety visor must not be
z
opened. It protects the filter
from dirt and damage.
If the filter does not darken
z
automatically, stop the welding
work immediately and contact
the manufacturer.
Only use the welding helmet at
z
temperatures between -5°C and
+55°C. The response time of
the filter will slow down if the
temperatures go below/above
these temperatures.
Clean the filter, helmet surface
z
and the solar cells regularly.
Replace the protective visor if it
z
showing signs of scratches or
damage.
The welding helmet does not
z
protect against impact.
Using, cleaning and storage
z
can reduce the service life of
approx. 6 years. If the view-
ing pane is scratched or there
is other visible damage to the
viewing pane or the welding
helmet, replace immediately.
ATTENTION! Materials
which come into contact with the
skin of the wearer can cause
allergic reactions for sensitive
individuals.
ATTENTION! Eye protection
equipment against high-speed
particles can pose a danger for
the wearer through transfer of
impact if they are worn over
standard prescription glasses.
ATTENTION! If protection
against high-speed particles at
extreme temperatures is neces-
sary, the selected eye protection
equipment must be marked with
the letter T in accordance with the
letters relating to impact intensity,
i.e. FT, BT or AT. If the letter for
impact intensity is not followed
with the letter T, the eye protection
equipment must only be used at
room temperature against high-
speed particles.
Safety instructions
GB
11

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis