Measurement Value Functions; Area - Parkside PLEM 50 A1 Bedienungs- Und Sicherheitshinweise

button and add / subtract button
15
mode.
- If no button is pressed for 3 minutes, the device will power off
itself.

Measurement value functions

To make it easier to process measurement results, the device offers
a number of integrated functions. By pressing the Function button
repeatedly, you can activate the following functions one after
15
the other: Area, Volume, Simple Pythagoras, Double Pythagoras.
Note: The desired function must be selected before the measure-
ment.

Area

1. Press the Function selection button
measuring mode indication symbol
2. Now measure the length and width of the area to be measured
by pressing the MEAS button
the area icon flashes on the display for the individual measure-
ment values. Right after the second measurement, the calcu-
lated area is shown on the bottom row
the corresponding line of the area icon stop flashing. Length,
width and perimeter will be shown on the top three rows of
the display orderly.
will be inactive at this
7
once. The area icon of
15
appears on the display.
25
. The corresponding line of
16
of the display and
23
GB/IE 49