Carry Straps - smith&nephew RENASYS TOUCH Bedienungsanleitung

Carry straps

To attach the carry strap to the device:
1. Slide the large opening of the carry strap
clip over the device attachment knob.
2. Pull up on the carry strap clip. The strap clip
will click when properly engaged. Repeat same
process with other strap on opposite
side of device.
3. Once both sides are connected to the
device they can be joined together to make the
short carry strap.
4. Push down on carry strap clip to remove
strap from the device.
Caution: Ensure the device always remains
in the upright position when using the carry
straps.
To connect and extend straps:
1. Join the carry strap connectors together for a short carry strap.
2. Join the carry strap connectors to the shoulder strap and/or extension
strap connectors to extend the length for carrying on the shoulder or
across the body.
3. Place the padded section of the strap against shoulder for maximum
comfort when carrying device.
Short carry strap
with clips
Shoulder strap
with shoulder pad
Extension strap
37
EN