Intended Use; Parts Description - Parkside PLEM 20 A2 Bedienungs- Und Sicherheitshinweise

Intended use

This product is suitable for measuring distances, lengths and
heights in indoor spaces. Any other use or product modification
shall be considered improper use and hold considerable safety
hazards. The manufacturer assumes no liability for damages
due to improper use. Not intended for commercial use.

Parts description

Receiver lens
1
Laser beam output opening
2
Display
3
MEAS button
4
continuous measurement)
Reference / Unit button (changing the measurement
5
reference point, changing unit)
Battery compartment cover
6a
Battery compartment
6b
Display
Laser on
7
Battery charge level display
8
First (previous) measured value
9
Length unit
10
Second (latest) measured value
11
Reference plane
12
The measurement is taken from the top side of the product
12 a
The measurement is taken from the bottom side of the
12 b
product
Note: First (previous) measured value will move to the top row
when the second (latest) measurement is successfully started.
(Switch on and off, single measurement,
GB/IE 23