Herunterladen Diese Seite drucken

Honeywell HLD25V6F12L 1/3” Format Auto Iris Lens, 2.5 mm – 6 mm, F1.2 Bedienungsanleitung

Werbung

HLD25V6F12L 1/3" Format Auto Iris Lens, 2.5 mm – 6 mm, F1.2
English
Français
A
Focus ring
Bague de variation de la
focale
B
Focus
Bouton de blocage de la
tightening knob
focale
C
Zoom
Bouton de blocage du
tightening knob
zoom
D
Zoom ring
Bague de réglage du zoom Anillo del zoom
E
CS-Mount
CS-Monture
1
Damp coil (–)
Asservissement (–)
2
Damp coil (+)
Asservissement (+) ouvrir
open
3
Drive coil (+)
Asservissement (+) ouvrir
open
4
Drive coil (–)
Asservissement (–)
Specifications / Spécifications / Especificaciones / Specifiche Tecniche / Especificações / Spezifikationen / Specificaties
Image Format / Format d'image / Formato de imágen / Formato imagine / Formato da imagem / Bildformat / Beeldformaat
Focal Length / Brennweite / Longueur focale / Longitud focal / Lunghezza focale / Foco de fundo / Brennweite / Focal-lengte
Focus Control / Commande de la mise au point / Control del foco / Controllo fuoco / Controle de foco / Fokusregulierungs / Focus-afstelling
Focus Range / Plage de mise au point / Rango de foco / Distanze di messa a fuoco / Alcance de foco / Fokusierungs-Bereich / Focus-bereik
Iris / Iris / Iris / Diaframma / Diafragma / Blenden / Iris
Zoom Ratio / Rapport de bourdonnement / Cociente del zumbido / Rapporto dello zoom / Taxa de zoom / Zoomfaktor / Zoomfactor
Back Focal Distance / Distance focale arrière / Distancia focal trasera / Distanza focale posteriore / Distância do foco de fundo / Rückseitiger
fokaler Abstand / Back focal-afstand
Horizontal Angle of View / Angle horizontal de vue / Ángulo horizontal de la visión / Angolo orizzontale di visualizzazione / Ângulo de visão
horizontal / Horizontale Blickwinkel / Horizontale beeldhoek
Lens Mount / Support d'objectif / Soporte del lente / Innesto obiettivo / Montagem da objetiva / Linsenfassung / Lensvatting
Operating Temperature / Température de fonctionnement / Temperature de régimen / Temperatura di funzionamento / Temperatura
operacional / Betriebstemperatur / Bedrijfstemperatuur
Dimensions (mm) / Dimensions (mm) / Dimensiones (mm) / Dimensioni (mm) / Dimensões (mm) / Abmessungen (mm) / Afmetingen (mm)
Weight / Poids / Peso / Peso / Peso / Gewicht / Gewicht
English
Mounting the Lens
Press the threaded portion of the lens mount against the threaded portion of the camera
mount, slowly rotate the lens clockwise, and then screw in the lens mount to be installed on
the camera.
Note
The lens mount has the slip structure. To change the position of the lens in the
direction of rotation, strongly rotate the lens clockwise. If it stops rotating, slowly
rotate the lens counterclockwise by touching the stopper before it is positioned as
set.
Focus Operation
1.
Loosen the focus tightening knob.
2.
Rotate the focus ring to adjust the focus. Rotate the ring to FAR side to set the focus to
infinity; rotate the ring to NEAR side to set the focus to near.
3.
Tighten the focus tightening knob.
Zoom Operation
1.
Loosen the zoom tightening knob.
2.
Rotate the zoom ring to select the appropriate field angle. Rotate the ring to WIDE to set
the zoom to wide or to TELE to set the zoom to telephoto.
3.
Refer to FOCUS OPERATION to adjust the focus.
4.
Tighten the zoom tightening knob.
Lens Maintenance
Dirty lens surface due to dust, oil or finger prints causes harmful flare that can result in
degenerating lens property. Dirt may cause mold or scorches on the lens. Be careful not to
damage the lens surface while cleaning. To clean the lens:
To remove dust—Brush with an oil-free soft brush or a blower-brush (for photography use).
To remove water or oil—Wipe and dry the lens surface with a clean soft cloth. Prepare a
washed-out cotton cloth or lens cleaning paper with alcohol or lens cleaning liquid. Clean by
moving spirally from the lens center towards its rim. Repeat until completely clean.
Document 900.0266 09/05 Rev 1.01
3
1
Español
Italiano
Anillo de enfoque
Ghiera di regolazione della
messa a fuoco
Tornillo de bloqueo
Pomello di bloccaggio del
del enfoque
fuoco
Tornillo de bloqueo
Pomello di bloccaggio dello
del zoom
zoom
Ghiera dello zoom
CS-Montura
CS-Montatura
Damp. coil (–)
Bobina di smorzamento (–) Bobina do amortecedor (–) Dämpfungsspule (–)
Damp. coil (+)
Bobina di smorzamento (+)
abierto
apertura
Drive coil (+)
Bobinal di azionamento (+)
abierto
apertura
Drive coil (–)
Bobina di azionamento (–)
DC-Type
White
Blanc Blanco Bianco
3
Blue
Bleu
Azul
Azzurro
4
Gray
Gris
Gris
Grigio
4
1
2
Green
Vert
Verde
Verde
2
Português
Anel de foco
Botão de ajuste de foco
Botão de ajuste de Zoom
Anel de zoom
CS-Mount
Bobina do amortecedor (+)
aberta
Bobina da transmissão (+)
aberta
Bobina da transmissão (–)
Français
Montage de l'objectif
Visser l'objectif sur l'appareil photo en le tournant tourner doucement dans le sens des
aiguilles d'une montre.
Remarque
La monture de l'objectif dispose d'une bague à structure glissante. Pour changer
la position de l'objectif dans le sens de la rotation, le tourner dans le sens des
aiguilles d'une montre. S'il bute, le tourner doucement dans le sens inverse des
aiguilles d'une montre en le positionnant contre la butée avant sa mise en place.
Mise au point
1.
Desserrer le bouton de blocage de la focale.
2.
Tourner la bague de variation de la focale pour régler la mise au point. Tourner la
bague vers FAR (éloigné) pour une mise au point vers l'infini et vers NEAR (proche)
pour des sujets proches.
3.
Resserrer le bouton de blocage de la focale.
Réglage du zoom
1.
Desserrer le bouton de blocage du zoom.
2.
Tourner la bague de réglage du zoom pour choisir l'angle de champ approprié. La
tourner vers WIDE (large) pour un grand angle ou vers TELE pour une longue focale.
3.
Pour la mise au point, se reporter à la section MISE AU POINT.
4.
Resserrer le bouton de blocage du zoom.
Entretien de l'objectif
Si la surface des lentilles est sale, poussiéreuse, grasse ou avec des traces de doigts, une
lumière parasite risque de dégrader leurs propriétés. La saleté peut provoquer de la moisissure
ou des brûlures sur les lentilles. Veiller à ne pas endommager la surface des lentilles lors de
leur nettoyage. Pour nettoyer l'objectif :
Pour ôter la poussière —Le brosser avec une brosse souple non grasse ou une brosse
soufflante (pour usage photographique).
Pour enlever l'eau ou la graisse —Essuyer et sécher la surface des lentilles avec un chiffon
doux et propre. Humecter un tissu de coton ou un papier de nettoyage de lentille avec de
l'alcool ou un nettoyant pour lentilles. Nettoyer l'objectif avec des mouvements en spirale du
centre vers la monture. Recommencer cette opération jusqu'à ce qu'il soit parfaitement propre.
Branco
Weis
Wit
190Ω
Azul
Blau
Blauw
Cinza
Grau
Grijs
M
Verde
Grun
Groen
500Ω
Deutsch
Nederlands
Fokusring
Instelring focus
Fokus-Feststellgriff
Blokkeerknop focus
Zoom-Feststellgriff
Blokkeerknop zoom
Zoom-Ring
Zoomring
CS-Anschlussgewinde
CS-vatting
Dempingsspoel (–)
Dämpfungsspule (+)
Dempingsspoel (+)
offen
open
Antriebsspule (+) offen Aandrijfspoel (+)
open
Antriebsspule (–)
Aandrijfspoel (–)
1/3"
2.5 mm ~ 6.0 mm
Manual
~ 0.3 m
4-pin DC Control–F1.2 (1.2~T360)
2.4x
7.51 mm (W) ~ 13.54 mm (T)
110.0° (W) ~ 46.2° (T)
CS
14°F to 122°F (-10°C to 50°C)
38.8 (L) x 33.5 (W) x 51.3 (H)
45 g

Werbung

loading

Inhaltszusammenfassung für Honeywell HLD25V6F12L 1/3” Format Auto Iris Lens, 2.5 mm – 6 mm, F1.2

  • Seite 1 HLD25V6F12L 1/3” Format Auto Iris Lens, 2.5 mm – 6 mm, F1.2 DC-Type White Blanc Blanco Bianco Branco Weis 190Ω Blue Bleu Azul Azzurro Azul Blau Blauw Gray Gris Gris Grigio Cinza Grau Grijs Green Vert Verde Verde Verde Grun Groen 500Ω...
  • Seite 2 WIDE (amplo), para configurar o zoom como amplo, ou para TELE (telefoto), para configurar o zoom como telefoto. Consulte OPERAÇÃO DE FOCO para ajustar o foco. Aperte o botão de ajuste de zoom. © 2005 Honeywell International Inc. All rights reserved. www.honeywellvideo.com...