Technical Data; General Power Tool Safety Warnings; Work Area Safety; Electrical Safety - Parkside PLLL 16 A1 Bedienungsanleitung

Technical data

Soldering iron PLBS 30 A1:
Rated voltage:
Nominal frequency:
Nominal power:
LED magnifier lamp with 3rd hand PLLL 16 A1:
Power supply:
Illumination:
Magnification:
Environmental conditions: -20 to +40°C
Mains adapter PLLL 16 A1-1:
Input voltage:
Power consumption:
Output voltage:
Output power:
Dimensions:
Foot (L x W):
Length of the gooseneck
(magnifying glass):
Length of the gooseneck
(3rd hand):
Magnifier diameter:
Spindle holder (Ø x L):
Weight:
PLLL 16 A1
230 V ~
50 Hz
30 W
4 x 1,5 V mignon batteries
(type AA/LR6)
16 LEDs
2x, 3.5 dioptre /
4x, 11.8 dioptre
< 95%
(not condensing)
100–240 V ~ 50/60 Hz
0.2A
5 V
3 W max
176 x 162 mm
265 mm
250 mm
95 mm
10.5 x 82 mm /
19 x 82 mm
approx. 1.1 kg
General Power Tool
Safety Warnings
WARNING!
► Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tools or
battery-operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of flam-
mable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.

2. Electrical safety

a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
GB
3