Connecting A Tv And Playback Components; Connecting Antennas - Pioneer VSX-S310-k Kurzanleitung

Connecting a TV and playback
components
VSX-S510
A
OPTICAL
HDMI IN
DIGITAL AUDIO OUT
HDMI/DVI-compatible TV
• The OSD will only be output from the HDMI OUT terminal.
• If the TV does not support the HDMI Audio Return Channel
function, optical digital cable ( ) connection is required to
A
listen to the TV sound over the receiver.
• If the TV supports the HDMI Audio Return Channel
function, the sound of the TV is input to the receiver via the
HDMI terminal, so there is no need to connect an optical
digital cable ( ). In this case, set ARC at HDMI Setup to
A
"HDMI Setup" on page 56.
ON
• Please refer to the TV's operation manual for directions on
connections and setup for the TV.
VSX-S310
A
HDMI IN VIDEO IN
HDMI OUT
HDMI/DVI-compatible TV
HDMI/DVI-compatible
Blu-ray Disc player, etc.
• Composite video cable
order to see the OSD of the unit on the TV.
• If the TV does not support the HDMI Audio Return Channel
function, optical digital cable
listen to the TV sound over the receiver.
• If the TV supports the HDMI Audio Return Channel
function, the sound of the TV is input to the receiver via the
HDMI terminal, so there is no need to connect an optical
digital cable
"HDMI Setup"
ON
• Please refer to the TV's operation manual for directions on
connections and setup for the TV.
B
OPTICAL
DIGITAL AUDIO OUT
HDMI OUT
HDMI/DVI-compatible
Blu-ray Disc player, etc.
( ) connection is necessary in
A
( ) connection is required to
B
( ). In this case, set at
ARC HDMI Setup
B
on page 56.
Connecting up (continued)

Connecting antennas

1 2
to
AM loop antenna
FM wire antenna
5