Herunterladen Inhalt Inhalt Diese Seite drucken

Power Tool Use And Care; Service; Appliance-Specific Safety Instructions - Parkside PSS 250 A1 Originalbetriebsanleitung

Schwingschleifer
Vorschau ausblenden Andere Handbücher für PSS 250 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 59
General power tool safety warnings
better control of the power tool in unexpected
situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from mov-
ing parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
g) If devices are provided for the connec-
tion of dust extraction and collection
facilities, ensure these are connected
and properly used. Use of dust collection
can reduce dust-related hazards.

4. Power tool use and care

a) Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job better
and safer at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power
tool that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power
source and / or the battery pack from
the power tool before making any ad-
justments, changing accessories, or
storing power tools. Such preventive safety
measures reduce the risk of starting the power
tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of un-
trained users.
e) Maintain power tools. Check for mis-
alignment or binding of moving parts,
breakage of parts and any other con-
dition that may affect the power tool's
operation. If damaged, have the power
tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
8
GB
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended could
result in a hazardous situation.

5. Service

a) Have your power tool serviced by a
qualified repair person using only iden-
tical replacement parts. This will ensure
that the safety of the power tool is maintained.
Appliance-specific
safety Instructions
To avoid the risk of injury or fire as well
as health risks:
When working outdoors, connect the
appliance via a residual current circuit-
breaker with a maximum breaking
current of 30 mA.
Only use an extension cord certified
for use outdoors.
Secure the workpiece firmly. Use
clamps / vices to firmly hold the work-
piece. It is thus better secured than just with
your hand.
In case of danger, immediately pull
the power plug from the socket.
Always run the power cord away
from the appliance to the rear.
DANGER OF FIRE FROM FlyING SPARKS!
Abrading metal creates flying sparks. For this
reason, always make sure that nobody is placed
in any danger and that there are no inflammable
materials near the working area.
Any harmful / noxious dusts generated from
sanding represent a risk to the health of the
person operating the device and to anyone
near the work area.
sanding wood and in particular when working
NOxIOUS FUMES!
DUST HAzARD! When

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis