Technical Data; Unpacking; Adjustment And Use - Parkside PBKS 53 A1 Bedienungs- Und Sicherheitshinweise

Ear muffs
Please pay close attention to the following infor-
mation and safety instructions to ensure the best
possible protection and comfort:
a) Please adhere to all instructions and tips regarding assem-
bly, adjustment and maintenance of the ear muffs.
b) The ear muffs are intended to protect your ears in noisy
areas.
c) The ear muffs should be worn at all times when in high-
noise areas.
d) The ear muffs can show signs of wear over time. Examine
them for tears or loose spots after each use.
m WARNING! Failure to comply with the safety in-
structions provided for the ear muffs can seriously
compromise their protective effect.
e) Do not clean or disinfect the ear muffs with chemicals or
substances that are harmful to the wearer.
f) Certain chemical substances can damage this product. De-
tailed information is available from the manufacturer.
g) Ear muffs and especially their ear cushions can wear down
over time. Examine them regularly for tears, loose spots
and other signs of wear.
h) Covering the ear cushions with "hygiene covers" can com-
promise the acoustics of the ear muffs.
Residual risks
Despite all precautions having been met, some non-obvious
residual risks may still remain. These can be minimised if the
"Safety instructions" and the "Intended use" are observed
along with the whole of the operating instructions.

5. Technical data

Safety goggles
Standard ...........................................................................EN166
Safety class .............................................................F (low energy
........................................................................ impact at 45 m/s)
Optical class .......................................................1 (continual use
........................................................................without filter effect)
Protective class type ............................................................. clear
Material:
Goggle lens ...........................................................Polycarbonate
Frame .................................................................................. Nylon
Manufacturer identification ................................................. YKFT
Goggle lens ..............................................................YKFT 1 F CE
Frame ...................................................................YKFT 166 F CE
Ear muffs
Standard .............................................................EN352-1:2002
Weight ..........................................................................ca. 144 g
Material:
Headband ........................................................................... POM
Ear cushions ............................................................................PVC
18 GB/MT
Damping values of the ear muffs
Frequency (Hz) 125
Median value Mf
10,1
(dB)
Standard
3,0
deviation Sf (dB)
Assumed
protection value 7,1
APV (dB)
Frequency (Hz) 2000
Median value Mf
35,4
(dB)
Standard
2,4
deviation Sf (dB)
Assumed
protection value 33,0
APV (dB)
H value (high level) ............................................................ 33 dB
M value (medium level) ..................................................... 24 dB
L value (low level) ............................................................... 15 dB
SNR value (single number rating) ..................................... 27 dB

6. Unpacking

• Open the packaging and remove the accessory carefully.
• Remove the packaging material as well as the packaging
and transport bracing (if available).
• Check that the delivery is complete.
• Check the accessory for transport damage.
m ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of swal-
lowing and suffocation!

7. Adjustment and use

Safety goggles
m WARNING! Check and clean the goggles before
use. Scratched or damaged protective glasses im-
pair visibility and offer only a reduced protective
effect. Safety goggles with scratched or damaged
protective glasses should be replaced immediately.
• Adjust the extensible headband of the safety goggles to fit
your head.
• Ensure that they fit comfortably and securely.
• When wearing the safety goggles, ensure that they fit com-
fortably.
250 500 1000
17,1 25,8 29,9
2,2 1,8 2,4
14,9 24,0 27,5
4000 8000
38,9 34,1
2,2 4,1
36,7 30,0