Maintenance And Cleaning; Service Centre; Warranty - Parkside PFS 710 B1 Bedienungs- Und Sicherheitshinweise

Preparing for use / Maintenance and cleaning / Service centre / Warranty
3. Bring the sabre saw vertical and continue saw-
ing along the cutting line.
Note: The saw blade used for this should not be
longer than 152 mm!

Maintenance and cleaning

Q
P ull the mains lead out of the mains socket
before you clean the device.
R eplace the saw blade as soon as its teeth be-
come blunt and it starts to produce defective
saw cuts.
A lways keep the device and the ventilation
slots clean.
C lean the device after you have finished using it.
D o not allow any liquids to enter the device.
Use a cloth to clean the housing. never use
petrol, solvents or cleaning agents that might
attack plastic.
If necessary, clean out the
saw blade mounting recess
with a thin paintbrush or compressed air.

Service centre

Q
repaired only by qualified specialist
personnel using original manufacturer
parts only. This will ensure that your device
remains safe to use.
lead needs to be replaced, always
have the replacement carried out by
the manufacturer or its service centre.
This will ensure that your device remains safe
to use.
Note: Spare parts not listed (e.g. carbon brushes,
switches) can be ordered through our call centre.

Warranty

Q
The warranty for this appliance is for 3
years from the date of purchase. The ap-
Have your device
If the plug or mains
pliance has been manufactured with care
and meticulously examined before deliv-
ery. Please retain your receipt as proof
of purchase. In the event of a warranty
claim, please make contact by telephone
with our Service Department. only in this
way can a post-free despatch for your
goods be assured.
The warranty covers only claims for material and
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile compo-
nents, e.g. buttons or batteries. This product is for pri-
vate use only and is not intended for commercial use.
The warranty is void in the case of abusive and im-
proper handling, use of force and internal tampering
not carried out by our authorized service branch. Your
statutory rights are not restricted in any way by this
warranty.
The warranty period will not be extended by repairs
made unter warranty. This applies also to replaced
and repaired parts. Any damage and defects extant
on purchase must be reported immediately after
unpacking the appliance, at the latest, two days after
the purchase date. Repairs made after the expiration
of the warranty period are subject to payment.
GB
Service Great Britain
Tel.: 0871 5000 720
(0.10 GBP/Min.)
e-mail: kompernass@lidl.co.uk
IAN 106629
MT
Service Malta
Tel.: 80062230
e-mail: kompernass@lidl.com.mt
IAN 106629
GB/MT 41