Proper Use; Features And Equipment; Included Items; Technical Information - Parkside PFS 710 B1 Bedienungs- Und Sicherheitshinweise

Introduction
Sabre saw PFS 710 B1
Introduction
Q
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. only use the unit as described
and for the specified applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.

Proper use

Q
The device is intended for sawing, cutting to length
or trimming of securely supported objects made of
wood, plastic and building materials. The sabre
saw is suitable for rough sawing work, straight and
curved cuts and sawing flush. Please take note of
the information on saw blades and the advice on
working with your saw. Any other use or modifica-
tion to the device shall be considered as improper
use and could give rise to considerable dangers.
The manufacturer will not accept liability for loss or
damage arising from improper use. The device is
not intended for commercial use.

Features and equipment

Q
oscillation speed setting wheel
1
Lock button
2
on / oFF switch
3
Handle
4
Shoe
5
Saw blade
6
Quick-release chuck
7
Shoe adjustment lever
8
Carbon brushes cover
9
Unlocking button
10
Saw blade for wood
11
Bi-metal saw blade
12
36 GB/MT

Included items

Q
1 Sabre saw PFS 710 B1
1 Saw blade for wood HCS 152 mm
1 Bi-metal saw blade 156 mm
1 operating instructions

Technical information

Q
Rated voltage:
nom. power input:
nom. no-load speed:
Blade stroke:
Max. cutting depth:
Saw blade mount size:
Protection class:
Noise and vibration data:
Measured value for sound determined in accord-
ance with En 60745. The A-weighted sound level
of the electric power tool is typically:
Sound pressure level:
Sound power level:
Uncertainty K:
Wear ear protection!
Evaluated acceleration, typical:
Hand / arm vibration a
h
Uncertainty K = 1.5 m / s
The vibration level specified in
these instructions was measured in accordance with
an En 60745 standardised measurement process
and can be used to compare equipment. The vibra-
tion emission value specified can also serve as a
preliminary assessment of the exposure.
The vibration level will change according to the ap-
plication of the electrical tool an in some cases may
exceed the value specified in these instructions. Re-
gularly using the electric tool in such a way may
make it easy to underestimate the vibration.
Note: If you wish to make an accurate assessment
of the vibration loads experienced during a particu-
230 V ~ 50 Hz
710 W
n 0–2800 min
-1
0
20 mm
Wood 160 mm
Aluminium 18 mm
Steel 8 mm
/ " (12.7 mm)
1
2
II /
88.02 dB(A)
99.02 dB(A)
3 dB
= 12.593 m / s
2
2