Interrupting Backup Mode; Resuming Backup Mode - KTM XCharge_professional Bedienungsanleitung

5
Interrupting
Backup mode
Resuming Back-
up mode
66
CAUTION! Risk of sparks if the charging leads are disconnected too soon. Before
disconnecting the charging leads, press the Stop/Start key to end Backup mode.
4
Disconnecting the charger
- Disconnect the black charging lead from the negative pole (-) of the battery
- Disconnect the red charging lead from the positive pole (+) of the battery
NOTE! Risk of damage to connection sockets and connecting plugs. Do not dis-
connect or unplug the charging leads while Backup mode is active.
1
2
To end Backup mode:
- Press the Stop/Start key
Press the Stop/Start key during Backup mode
- Backup mode is interrupted
Press the Stop/Start key
- Backup mode is resumed