English - IKEA METALLISK Handbuch

ENGLISH

Important!
Please read these instructions through carefully
before use. Always follow the instructions!
Cleaning
Before using your new espresso maker for the
first time, brew one pot of coffee and pour it out.
Always wash it by hand after use. Make sure the
filter is positioned in the right direction when fitting
the espresso maker together (see figure, part 2).
Instructions for use
1. Pour water into the bottom section of the
espresso maker (6). The water should reach
the safety valve (5) but not rise above it.
2. Fit the funnel (4) and fill it with finely ground
espresso coffee. Do not pack the coffee hard.
When the funnel is full, the amount of coffee is
correct in relation to the amount of water.
3. Screw the bottom and top sections (6 and 1)
together. Make sure that the fit between the
filter (2) and the gasket (3) is perfectly tight so
that no water can leak out.
4. Place the espresso maker on a hob. The coffee
will then rise into the top section (1).
5. The coffee in the espresso maker is ready
as soon as the bubbling noise has stopped.
Remove the espresso maker from the hob
immediately to avoid dry-boiling.
6. Serve the coffee directly from the espresso
maker without taking it apart.
Important!
─ To avoid burns; do not take the espresso
maker apart (1 and 6) until it has cooled down
completely.
─ Always turn the safety valve (5) away from you
when the espresso maker is in use.
─ The espresso maker is designed for making
espresso coffee only.
─ Never make a smaller amount of espresso
coffee in the espresso maker than the amount
stated above.
4